The Aeotec Smart Switch 6 is an intelligent remote controllable adapter plug which can control and monitor any electrical device. Due to its energy measurement function, you can identify all power eater in your home.

With the AEOTEC Dual Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Additionally, the ZW132 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

The AEOTEC Nano Dimmer is a flush-mounted radio module which turns a standard light installation into an intelligent smart home component with Z-Wave wireless technology.

The compact radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls (switch/dim) the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Close your motorized windows automatically if it starts raining or shut down your shades if it is to warm outside. The Aeotec Nano Shutter enables you to control a broad selection of devices wirelessly and intelligently. The module equips motors for shutters, shades, garage doors, venetian blinds, etc. with Z-Wave technology. Thus, shutters and venetian blinds can be controlled both wirelessly via Z-Wave commands and locally via the connected conventional wall switch. The Aeotec Nano Shutter is designed to be mounted inside a flush mounting box, hidden behind a conventional wall switch.

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Micro Energy Illuminator Micro is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Micro Smart Energy Illuminator is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Heavy Duty Switch is used for wireless control, automate and record the power consumption of heavy loads up to 40 amps. The Device can be controlled by other Z-Wave devices and can switch his heavy loads. He also works as a repeater and can forward, if the respective device are in range, signals to other Devices.

With AEOTEC’s new and smart RGB bulb color comes into play. The Aeotec bulb fits into every E27 bulb holder and connects to a smart home center through Z-Wave wireless technology. It is able to vary brightness and light color as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes.
The bulb uses 15 different LED diodes to shine in perfect shading of natural white light. These 15 diodes confer light temperature of 2580-7050K on the LED bulb.

• Cold white: 4745K to 7050K;
• Natural white: 3710K to 4745 K;
• Warm white: 2580K to 3710K ;

Well-known manufacturers such as Samsung and Philips also use the same LED technology.
An additional row with diodes gives Aeotec’s bulb the opportunity to vary between 16 million colors.
Furthermore the bulb can be switched on and off time-controlled via defined scenes or by a motion sensor. Use your Aeotec bulb as notification or status LED. Installed in the corridor it could flash in red color if you want to leave your home and windows or terrace door are still open. Due to LED technology power consumption is very low compared to conventional bulbs. The Aeotec bulb is as bright as a conventional 70W bulb, but needs only 9W.

Smarter. Safest. Smaller still. Plug it. Automate it. Control it. Understand how much electricity you are spending. Smart Switch 7 is Aeotec's smallest smart plug and is also everyone's safest.

Intelligence is in control. Appliances turn on when needed and off when not. On a schedule. Or intelligently automated and triggered when needed. You are completely in control. It is smart because it can be automated. But it's also a smart plug because the power to turn it on or off manually is always yours.

In real time and with 99% accuracy, Smart Switch 7 will analyse appliances electricity consumption helping you save what you spend. Furthermore the Smart Switch 7 is one of the best in design and quality. European design, German engineering and SGS certfication make Smart Switch 7 the smallest and safest smart plug.