Operate up to 6 devices inside a closed cabinet, using your own remote control.
The Marmitek Invisible Control 6 makes it possible to operate equipment inside a closed cabinet. The set consists of a receiver, a module and 6 emitter LEDs. You stick an emitter LED on each device you want to operate. This enables you to operate up to 6 devices that are inside a closed cabinet, using your own remote control.
By default, this infrared extender consists of a:
Infrared receiver: ‘receiver’
Infrared module: ‘module’
Infrared transmitter: ‘transmitter’ (emitter LED)
You place the receiver within your remote control's line of sight, having it connected to the module you placed inside the cabinet. You then connect the transmitter to the module. Your remote control's signal is transmitted via the receiver to the module, which in turn transmits the signal to the transmitter(s). The transmitter then 'operates' your audio visual equipment. This ensures that you do not have to open any cabinet doors in order to operate your equipment.
The Invisible Control 6 is similar to the Invisible Control 6 XTRA and the 6 XTRA | SMART. The last two are equipped with infrared blaster LEDs, which increases the ease of use, and can operate more devices.
Technical specifications
| Infrared frequency range | 30 - 60 kHz |
| Infrared reception range | ± 10 metres |
| Infrared reception angle | 60° (+30°/-30° from centre) |
| Cable length | 3 metres |
| Dimensions (h x w x d) | 11 x 15 x 30 mm |
| Power | 100-240 VAC 50/60 Hz, 5 VDC mini USB adapter (included) or via mini USB cable (not included) |
| Dimensions (h x w x d) | 19 x 80 x 43 mm |
| Infrared input | 1 x 3.5 mm jack (mono) |
| Infrared output | 2 x 2.5mm jack socket (mono) for emitter LEDs |
| Infrared emitter (adhesive) LEDs | 100, 200 and 300 cm with 2.5 mm jack plug (mono) |
