Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Philio Sensors

    Philio Sensors available on eurox10.com

    View as Grid List
    Sort by
    Display per page

    3 in 1 Sensor (illumination, temperature, door/window)

    ZWPHI PST02-1C
    €46.99 incl tax
    The Z-Wave 3 in 1 sensor (PHI_PSM01) is designed with three detection sensors:
    • Door/windows;
    • Temperature sensor;
    • Luminosity sensor.
    The sensor consists of two parts; a Detector and a Magnet. They are designed to be fitted to doors or windows with the Magnet mounted on the opening part and the Detector mounted on the fixed frame. Opening the protected door/window will remove the magnetic field, trigger the detector and generate an alarm condition, (if the system is armed). The sensor can also applied to automatic light control, one scenario is to get the illumination lux level from built in illumination sensors and send a signal to Z-wave switch to turn the light on once we open the door when the room is dark. Every time when Door/Window trig, the sensor will also send temperature and illumination value as well. Also the temperature will send out the value when temperature changes. Note: The illumination sensor yet does not work with Fibaro Homecenter 2 and Zipato Zipabox.
    Availability: In stock

    3 in 1 Sensor (motion, illumination, temperature) - Z-Wave Plus

    ZWPHI PST02-1B
    €49.00 incl tax €53.98 incl tax
    The Z-Wave 3 in 1 sensor (ZWphiPST02-1B) is designed with three detection sensors:
    • PIR/Motion;
    • Temperature sensor;
    • Luminosity sensor.
    The detector can be used as a security device or home automation device. When the detector is cooperated with security appliances, the detector is acting as a security device by detecting changes in infra-red radiation levels. If a person moves within or across the devices field of vision, a trigger radio signal will be transmitted to cause full alarm condition in order to frighten intruders away. Alternatively, when the detector is worked with Z-Wave Controller, the detector can be set to perform the role of home automation device by detecting both changes in infra-red radiation levels and percentage of lux levels. Every time when PIR trig, the sensor will also send temperature and illumination value as well. Also the temperature will send out the value when temperature changes. Note: The illumination sensor does not work with Fibaro Homecenter 2 and Zipabox yet.
    Availability: In stock

    4 in 1 Sensor (motion, illumination, temperature, door) - Z-Wave Plus

    ZWPHI PST02-1A
    €59.00 incl tax
    The Z-Wave 4 in 1 sensor (ZWphiPST02-1A) is designed with three detection sensors:
    • Door/window sensor;
    • PIR/Motion;
    • Temperature sensor;
    • Luminosity sensor.
    Thanks to this the PSM02 can be uses as a security device or home automation device, e.g. to send an alarm when a motion is detected, turn the light on/ off automatically at night or to adjust the heater. The product consists of two elements - the detector and the magnet. The magnet is mounted on the moving part of the window or of the door. The other part is placed on the frame. Note: The illumination sensor does not work with Fibaro Homecenter 2 and Zipabox yet.
    Availability: In stock

    Flood Multisensor 3 in 1

    ZWPHI PAT02
    €59.00 incl tax
    Zipato Flood Multisensor 3 in 1 integrates flood, temperature and humidity sensors in one device. Zipato Flood Multisensor 3 in 1 offers elaborate security and ambient sensing options. Multifunctional nature of this product allows you to informed about water leakages and potential flood disasters, as well as to measure temperature and humidity levels. When used with Zipato home automation controllers it can be part of any automation scenario created using Zipato Rule Creator. Accordingly it can be used to automatically trigger other Z-Wave devices when activated.
    Availability: Usually available for shipment within 4-6 business days after ordering.

    Outdoor Motionsensor with magnetic holder and lens cover

    ZWPHI PSP05-D
    €59.00 incl tax
    The new Philio Motion Detector in small ball design detects movements at a distance of up to 12 meters. The sensor can be easily installed on the ceiling or a wall thanks to a supplied magnetic holder. Thanks to the unique and descretely design, you can place the sensor anywhere to automate your light. Then your light switches on only when the movement is detected, and if there is no person in the room, the lamps are not switched on.

    The sensor also includes a lens cover. With the cover, you can hide an area which is not to be detected by the motion detector.

    In addition, the sensor is suitable for outdoor use. This allows you to extend your automation and alarm system to the outside. The sensor is battery operated and can be easily added to your Z-Wave Smart Home System.
    Availability: In stock

    Outdoor Motionsensor with square recessor

    ZWPHI PSP05-B
    €59.00 incl tax
    The compact sensor in ball design recognizes motion in a distance up to 12 meters and can be installed quite easily and individually at ceilings or walls.
    This allows you to place the sensor descretely next to your lighting and automate your lights.

    In addition, the sensor is suitable for outdoor use. This allows you to extend your automation and alarm system to the outside. The sensor is battery operated and can be easily added to your Z-Wave Smart Home System.
    Availability: Usually available for shipment within 4-6 business days after ordering.

    Outdoor Motionsensor with round recessor

    ZWPHI PSP05-C
    €59.00 incl tax
    The compact sensor in ball design recognizes motion in a distance up to 12 meters and can be installed quite easily and individually at ceilings or walls.
    This allows you to place the sensor descretely next to your lighting and automate your lights.

    In addition, the sensor is suitable for outdoor use. This allows you to extend your automation and alarm system to the outside. The sensor is battery operated and can be easily added to your Z-Wave Smart Home System.
    Availability: Usually available for shipment within 4-6 business days after ordering.

    Round Recessor for Motion Sensor

    ZWPHI SPSP05-C
    €14.99 incl tax
    The Philio Round Recessor is made to mount motion sensors on the ceiling. The Fibaro motion sensor and the Philio outdoor motion sensor fit perfectly into the brackets. So the motion sensor is installed in the right position and through a firm and reliable attachment.
    Availability: In stock

    Square Recessor for Motion Sensor Philio and Fibaro

    ZWPHI SPSP05-B
    €14.99 incl tax
    The Philio Square Recessor is made to mount motion sensors on the ceiling. The Fibaro motion sensor and the Philio outdoor motion sensor fit perfectly into the brackets. So the motion sensor is installed in the right position and through a firm and reliable attachment.
    Availability: Usually available for shipment within 4-6 business days after ordering.