Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Fibaro

    Roller Shutter 4

    €81.18 incl tax
    FIBARO Roller Shutter 4 - in wall Z-Wave Series 800 actuator for shutters and blinds. FIBARO ROLLER SHUTTER 4 is a device designed to control roller blinds, awnings, venetian blinds, curtains and pergolas. FIBARO ROLLER SHUTTER 4 allows precise positioning of roller blinds or venetian blind slats. The device is equipped with energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
    SKU: ZWFIB FGR-224
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Availability: In stock

    New devices design
    FIBARO focused on easy installation and intuitive first run. There are more inputs for N and L wires, so that allows opt-out from using splicing connectors.

    Smaller device
    Device's shape and dimension enable easy and fast installation in flush-mounted boxes. Button and the diode are easily accesible.

    Equipped with plug connectors
    Enable even faster assembly - no need to use screw driver.

    3 Extra connecting cables included in the box
    Additional wires to connect the button are included.

    Inbuilt Bridge
    Easy bridging option for live and neutral. There is no need to use wago connectors for connecting wires. You save the space in the box and shorten installation time thanks to push-in wires connector.

    Features of Fibaro Roller Shutter 4

    • Compatible with any Z-Wave or Z-Wave+ Controller
    • One of the smallest shutter controller available
    • Equipped with Z-Wave 800 chip to provide better range
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
    • Can be used with roller blinds, venetian blinds, pergolas, curtains, awnings, blind motors with electronic or mechanical limit switches
    • Active power and energy metering functionality
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network
    • Works with various types of switches – momentary, toggle and dedicated roller blind switches
    • Easy and quick too install thanks to push-in wires connector and inbuilt bridge
    • To be installed in wall switch boxes

    Technical specifications of FIBARO FGR-224

    • Power supply: 100-240V~50/60Hz
    • Rated load current: 2A for motors with compensated power factor (inductive loads)
    • Supported motor type: single-phase AC motors
    • Required limit switches: electronic or mechanic
    • Operating temperature: 0°C - 35°C
    • For installation in boxes: Ø = 50mm, depth ≥ 60mm
    • Radio protocol: Z-Wave (800 series chip)
    • Radio signal power: up to 5dBm
    • Radio frequency band: 868.4 MHz
    • Range: up to 100m outdoors, up to 30m indoors (depending on the terrain and building structure)
    • Dimensions (L x W x H) 46mm x 36mm x 19,9mm
    • Compliance with EU directives: RoHS 2011/65/EU, RED 2014/53/EU
    Products specifications
    TechnologyZ-Wave
    FunctionRoller shutter
    Product typeIn wall
    Write your own review
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    New devices design
    FIBARO focused on easy installation and intuitive first run. There are more inputs for N and L wires, so that allows opt-out from using splicing connectors.

    Smaller device
    Device's shape and dimension enable easy and fast installation in flush-mounted boxes. Button and the diode are easily accesible.

    Equipped with plug connectors
    Enable even faster assembly - no need to use screw driver.

    3 Extra connecting cables included in the box
    Additional wires to connect the button are included.

    Inbuilt Bridge
    Easy bridging option for live and neutral. There is no need to use wago connectors for connecting wires. You save the space in the box and shorten installation time thanks to push-in wires connector.

    Features of Fibaro Roller Shutter 4

    • Compatible with any Z-Wave or Z-Wave+ Controller
    • One of the smallest shutter controller available
    • Equipped with Z-Wave 800 chip to provide better range
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
    • Can be used with roller blinds, venetian blinds, pergolas, curtains, awnings, blind motors with electronic or mechanical limit switches
    • Active power and energy metering functionality
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network
    • Works with various types of switches – momentary, toggle and dedicated roller blind switches
    • Easy and quick too install thanks to push-in wires connector and inbuilt bridge
    • To be installed in wall switch boxes

    Technical specifications of FIBARO FGR-224

    • Power supply: 100-240V~50/60Hz
    • Rated load current: 2A for motors with compensated power factor (inductive loads)
    • Supported motor type: single-phase AC motors
    • Required limit switches: electronic or mechanic
    • Operating temperature: 0°C - 35°C
    • For installation in boxes: Ø = 50mm, depth ≥ 60mm
    • Radio protocol: Z-Wave (800 series chip)
    • Radio signal power: up to 5dBm
    • Radio frequency band: 868.4 MHz
    • Range: up to 100m outdoors, up to 30m indoors (depending on the terrain and building structure)
    • Dimensions (L x W x H) 46mm x 36mm x 19,9mm
    • Compliance with EU directives: RoHS 2011/65/EU, RED 2014/53/EU
    Products specifications
    TechnologyZ-Wave
    FunctionRoller shutter
    Product typeIn wall
    Customers who bought this item also bought

    Double Switch 2 - Relay Insert 2 * 1.5 KW Z-Wave Plus

    ZWFIB FGS-223
    €77.49 incl tax
    FIBARO Double Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
    Availability: Out of Stock - on backorder and will be dispatched once in stock.

    MH7H-EH Electring floor Heating Thermostat

    ZWMCO MH7H-EH
    €149.99 incl tax
    The ZWMCO MH7H-EH thermostat is a device for room temperature control, equipped with Z-Wave wireless technology. It is applied to control electrical heating systems such as heating cable, electro-thermal film, heating actuator, electrical globe valve etc.
    The wall thermostat ZWMCO MH7H-EH requires a static installation with mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas.
    With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc.
    Availability: Usually available for shipment within 4-6 business days after ordering.

    Single Switch 2 - Relay Insert 1 channel Switch2 Z-Wave Plus

    ZWFIB FGS-213
    €77.49 incl tax
    FIBARO Single Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
    Availability: In stock

    Bus PIR detector for 100 series

    JA-110P
    €39.99 incl tax
    Availability: Usually available for shipment within 1-2 business days after ordering.

    Dimmer Bypass 2

    ZWFIB FGB-002
    €15.99 incl tax

    Bypass Fibaro is a device complementary to Fibaro Dimmer FGD212. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.

    Availability: In stock