Video doorbell with built-in AI, PIR sensor, and app control.

BulletCam (5 Mp/2,8 mm) - Wired security IP camera with up to 2,880 × 1,620 px resolution and 100°–110° viewing angle
BulletCam (8 Mp/2.8 mm) - Wired security IP camera with up to 3,840 × 2,160 px resolution and 100°–110° viewing angle
BulletCam (5 Mp/4 mm) - Wired security IP camera with up to 2,880 × 1,620 px resolution and 75°–85° viewing angle
BulletCam (8 Mp/4 mm) - Wired security IP camera with up to 3,840 × 2,160 px resolution and 75°–85° viewing angle.

Bullet format IP camera with a high-sharpness fixed lens. Incorporates advanced Hybrid Light technology (IR + White Light) triggered by Artificial Intelligence for optimized outdoor surveillance.

Bullet format IP camera with HLVF technology. Motorized varifocal lens for remote adjustment, deterrent Hybrid Illumination, and AI detection. Available in 5MP or 8MP (4K).

Junction box for Bullet, Dome and Turret Ajax cameras
Suitable for outdoor use
Wall or ceiling installation
Includes cable gland

Corridor lens for Jablotron's motion detectors. Compatible with JS-10, JS-20, JS-25, JA-60P, JA-80P, JA-80PB, JA-84P e JA-83P.

Drill-in magnetic detector , NC contact with wires. Color Brown.

The JA-87P wireless outdoor detector with curtain lens characteristics is designed to indicate disturbances outside the building caused by human bodies. It is a dual zone outdoor detector by Optex with a 5° angular width detection zone which makes it very suitable for guarding narrow spaces such as balconies, French doors, terraces, etc. It is supplemented with a transmitter compatible with JA-8x OASiS systems. Both the detector and the transmitter are powered by a lithium battery. The common power supply is beneficial as the low battery signal is transmitted to a control panel as standard. The detector is equipped with three TAMPER contacts (at the front on the detection part and the front and rear on the transmission part), which immediately report opening of the detector cover or its tearing from the place of installation. The detector can also have the anti-masking function activated. The detector reports its current status via control transmissions to the system.

This siren was designed and made in Portugal.

It has been designed for exterior use. Get is power trough the alarm central and a backup battery incorporated.

Have a tamper that originates an alarm in case of cover violation.

The WJ-80 is designed to connect JA-80H outdoor keypads or JA-80N RFID readers to a control panel. It provides an output to operate the electric strike of a door lock and is equipped with a wireless door bell transmitter.
The WJ-80 can also be used to interface to a third party keypad (reader) which uses Wiegand 26b protocol (e.g. HID RK-40 a RK-10).

Siren kit external, wired to the security console SC-28 Homeprotector.
When the control panel SC-28 is triggered, sends a set of X10 signals to the grid that can be used to activate the lighting of your home or signaling systems such as sirens or fireflies.

The Universal GSM module is easy to connect (install) with your HomeGuard or other PSTN alarm panels, by inserting a telephone wire in both analogue inputs. The GSM module enables the control panel to communicate via cellular networks.
The modem translates the analogue signals and converts them into a GSM signal. A SIM card (prepaid or subscription from any provider) has to be placed inside the GSM module.
The GSM module creates a two-way communication. This enables your security system to send an alarm alert to your mobile phone in cause of an emergency, and makes it possible to monitor and control your security system remotely.
This model is supplied with an E-plug.

This module provides 10 additional wired inputs, thus extending the total capacity to 14 wired inputs.

Send a help message in case off na emergency. If the user presses the "Emergency Call" button an panic alarm is triggered.

The JA-80IR is designed to detect the interruption of infra-red beams by intruders walking between IR transmitters and receivers. The unit comprises an Optex sensor and a Jablotron transmitter and is powered by 4 lithium batteries. Tampering is also signalled to the control panel in addition to beam blocking and the results of regular self-testing.

The Remote Chime is designed to work with the X10 Security Console or Home Controller to provide a pleasant annunciator chime when someone approaches. It will also respond as Siren in case the Security Console is activated. It can also be activated using the correct House Code and Unit Code from any X10 controller.

100% autonomous alarm panel, designed to run exclusively on external batteries (no mains power). Dual SIM 4G and photo verification support.

The JA-85B glass-break detector uses the analysis of air pressure variations combined with the characteristic sound of glass breaking and it is designed for indoor use in buildings or in cars. The battery-powered detector communicates via OASIS radio protocol.

The OS-366A is an hardwired outdoor backup siren combining a loud acoustic siren with a flashing light. The high-powered flashing light helps to locate the active siren

PowerHorn is used as an additional audio alarm unit for use with the Home Security System which gives an additional independent 110 decibel sound output when the security system is triggered. The PowerHorn will only trip a few seconds later after the alarm trips. It counts the sequence transmitted to flash lights connected to Lamp Modules after the lights have flashed 4 or 5 times. This prevents it from being accidentally tripped from any other X10 controller.
You can also trip the PowerHorn from any other X10 controller, which is useful in panic situations.
It can be added anywhere around the home; nobody wants to hang around when one of these activate.

The detector has one NA (normally open) input for connecting the detector’s probe (included).
Coded RF signal with 30m range in open field.
Up to 30 detectors can be used with the SC-28 Homeprotector.

The JA-60P is an intruder detector designed to detect human body movement in a protected area.

(Used unit, refurbished as new)

The JA-85P mini-size motion detector uses a PIR sensor and it is designed for indoor use in buildings or in cars. The battery-powered detector communicates via OASIS radio protocol

The JA-60G detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc).

The RC-87 is a component of Jablotron’s Oasis 80 alarm system. It allows users to trigger panic alarms or to control appliances remotely.

The detector indicates fire hazards using the built-in LED indicator and alarm outputs ALARM and TAMPER. These outputs must be connected to control panels complying with EN 50131-3.
The SD-282 ST consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light and is very sensitive to dust particles which are present in smoke. There is also a built-in heat detector for detecting fire which generates heat quickly with a small amount of smoke. The microprocessor performs digital analysis for a high false-alarm immunity.

The JA-65X digital communicator is designed for JA-63 and JA-65 alarm control panels. If the 65X module is installed, the control panel can communicate with a Monitoring Station, send voice messages, SMS messages and dial a numeric Pager as well as communicate with a remote PC. A standard analog telephone line (type TNV 1-3) must be connected to the module for these functions.

The RC-88 is designed to be a remote control for setting/unsetting (arming/disarming) an alarm system, triggering panic alarms or remotely controlling other appliances. The battery-powered wireless button communicates via OASIS radio protocol.

Get warned by flooding and intervene to prevent against water damage. The ebode water detector is battery operated and provided with 2 sensors which have to be placed on the location where water will be expected. When detecting water or moisture the eWD18 will sound an alarm (85DB), like a smoke detector does as a stand-alone system. To register the eWD18 to an X-10 network (BS800 HomeGuard, SC-28 Homeprotector/ProtectorPlus BS880/4 and BS880/7), the water detector is part of your X10 security system and here an alarm message will also be given.

Maintenance-free rechargeable lead-calcium batteries with 12V voltage and 2,2Ah capacity. This type of battery has a long lifetime and do not need any other care other than charging.

This type of acustic indicator is 12VDC powwered and can be used as a powerful indoor siren.

4,8V 1800mAh rechargeable NiCd battery to be used with the OS-36x wired sirens.

The JA-88P wireless PIR detector is designed to indicate disturbance outside the building caused by human bodies. It is a two-zone outdoor detector by Optex supplemented with a transmitter compatible with JA-80 OASiS systems. Both the detector and the transmitter are powered by three lithium batteries. Both devices have a common power supply and the low battery signal is transmitted to an ESS control panel as a standard. The detector is equipped with two TAMPER contacts (front and rear), which immediately report opening of the detector cover or its possible tearing from the place of installation. The detector regularly performs automatic tests and reports its status via control transmissions to the system.

12V 7Ah Backup batteryfor the JA-65K security console.

The JA-86P is a component of Jablotron’s Oasis 80 alarm system. It is designed to detect human body movement inside buildings. Detection in two zones makes this detector more immune to moving pets. The battery-powered detector communicates via OASIS radio protocol.

This P.I.R. motion detector is used to protect interiors. It detects any movement of objects with a temperature close to that of the human body.

The JA-80G detects mixtures of air and combustible gases or fumes (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc). The detector detects two levels of gas concentration, responding with two different reactions. The mains-powered detector indicates a gas leakage optically, and acoustically, and transmits alarm wirelessly via Oasis protocol.

Wireless smart relay for lighting control and dimming.
Jeweller technology (868 MHz) with up to 1100m range.
Ajax App control, automation scenarios, and touchless activation (up to 15 mm).

The JS-25 COMBO is an outstanding "two in one" detector, which dramatically simplifies alarm installations.. This detector combines two sensors (P.I.R. motion & acoustic glass break) in one housing.

The JA-83M is a component of Jablotron’s Oasis alarm system. It is designed to detect the opening of doors, windows etc. The battery-powered detector communicates via OASiS radio protocol.

The JA-81M is a component of Jablotron’s Oasis 80 alarm system. It is designed to detect the opening of doors, windows etc. It can also be extended by a normally closed / normally open sensor.
It is also designed to detect the handling of roller blinds. This is achieved by detecting ratchet-wheel movements. Small movements are filtered out so that wind blasts do not cause false alarms.
The battery-powered detector communicates via OASIS radio protocol.

The UC-280 is an 8-zone interface linking JA-60 wireless detectors with hard-wired security control panels.

The JA-82M designed to detect opening windows, doors etc.

The JA-84P provides human body movement detection including visual alarm verification.

The JA-80PB consists of two independent detectors which occupy two separate enrollment addresses in the control panel. The motion detector uses a PIR sensor. The glass-break detector uses the analysis of air pressure variations combined with the characteristic sound of glass breaking. The product is designed for internal use in buildings. The battery-powered detector communicates via OASIS radio protocol.

The MT-77 Piccolo terminal is a communication accessory for Jablotron home system. It should be connected to JA-6x control panel equipped with GSM communicator.

The JA-89P is an outdoor intruder detector designed to detect human body movement in a protected area. It supplements a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the sensor to be used within JA-80 OASiS systems.

Magnetic door sensor Normaly closed contact

The JA-80P is designed to detect human body movement inside buildings. The detection pattern can be modified by optional lenses. Detector immunity has two selectable levels. The battery-powered detector communicates via OASIS radio protocol.

Maintenance-free rechargeable lead-calcium batteries with 6V voltage and 1,3Ah capacity. This type of battery has a long lifetime and do not need any other care other than charging.

Magnetic door sensor Normaly closed contact

37cm antenna with magnetic base for Jablotron JA-60GSM dialer.

The GS-133 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, etc). The detector detects two levels of gas concentration - with corresponding output reactions.
The main GS-133 features are: high reliability and sensitivity, compact size and long stability & lifetime.

Detects shock and tilt on doors, windows etc. caused by an intruders attempts to force, smash, drill, or saw through. Has easy installation and uses digital signal processing. Features a memory of previous shocks.
The detector is a component of the JABLOTRON ALARMS Oasis security system. It has two selectable operation modes. The mode for the detection of shocks / vibrations of doors, windows, etc. can be used to indicate attempts to breach these by force.
The tilt detection mode can be used to indicate unwanted tampering with the object to which the detector is firmly fixed. This may be used for safes, artworks etc.
The detector uses a semiconductor tri-axial accelerometer with digital output. Its signal processing guarantees a high immunity against false alarms.
The detector communicates wirelessly using Oasis protocol and it is battery powered.

The detector is intended to detect human body movement in buildings. Using two sensors ensures better immunity against triggering by moving pets.
The signal is processed by a multiple signal analysis method which guarantees excellent sensitivity and a high resistance to false alarms. Detection analysis can be adjusted to increase its immunity (if installed in a problematic location). The detector distinguishes itself with excellent immunity against high frequency interference and other false signals. It can be installed on a flat wall or in a corner.

The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector. Plug it into the IN1 input terminal (red wire) and GND (black wire). If the detector is triggered (e.g. by a water), it sends a trigger signal. If the detector goes into a stand-by condition, it sends a non-triggered signal. The LD-81 takes its power supply from the JA-81M´s circuit.
It is possible to use the LD-81 with an older type of detector, the JA-60N, for Profi systems if you insert a 4k7 resistor in series with the LD-81 between the INP (red wire) input terminals and GND (black wire).

FEATURES: - 50mm magnet clearance - Adjustable aluminum bracket - Material: The. Cast Zinc Contact Encapsulation B. ABS magnet encapsulation C. Aluminum alloy L-bracket - Shielded cable with lengths and 61 cm - High quality reed and magnet switch - Gray color

Backup battery for the JA63Kxx security systems.

Curtain lens for Jablotron's motion detectors. Compatible with JS-10, JS-20, JS-25, JA-60P, JA-80P, JA-80PB, JA-84P e JA-83P.

The RC-89 is a component of Jablotron’s Oasis 80 alarm system. It can be used as a wireless doorbell button or to trigger a panic alarm or to operate various electrical appliances. The battery-powered button communicates via OASIS radio protocol.