Dimming actuator/interface 230V

Features:

• Transmission of ON/OFF/BRIGHT/DIM commands;
• Responds to ON, OFF, DIM, BRIGHT and extended dim level commands;
• One user-definable address (free programmable address) A1-P16;
• Suitable for operation with retractive switches with 1 or 2 normally open contacts;
• Can be used as an actuator for placing behind wall sockets (insulating connecting wires) ;

TechInfo:

• Rated voltage: 230Vac, 50 Hz;
• Output: 250 W incandescent or 230Vac halogen bulbs, 200 VA Halogen lighting with wound transformer, 250 VA Halogen lighting with leading edge electronic transformer;
• Cartridge fuse: Radial lead micro fuse, 1.6 AT, according to IEC 60127-3, standard sheet 4;
• Current consumption: < 30 mA capacitive;
• Signal transmission: > 5 Vpp in 5 O at 120 kHz in accordance with EN 50065-1, EN 50065-2-1, EN 50065-4-1;
• Transmission synchronization: 1 pulse burst at 0°/180°;
• Signal sensitivity: 25 mVpp…6 Vpp at 120 kHz ± 4 kHz;
• Signal/noise ratio: 1,35 : 1;
• Connection range: up to 2.5 mm2, tightening torque 0.5 Nm;
• Minimum ambient temperature: 0°C;
• Maximum ambient temperature: 40°C;
• Atmospheric pressure: 86 pkA - 106 pkA;
• Relative humidity (non condensing): 30 tot 90%;
• Standards: NEN-EN-IEC 60669-2-1, NEN-EN-IEC 60669-2-2;