Close
(0) artículos
No tiene articulos en su carrito de compras.
TODAS LAS CATEGORIAS
    Filters
    Preferencias
    Buscar
    Fabricante: Fibaro

    Roller Shutter 4

    €81,18 IVA incluido
    FIBARO Roller Shutter 4 - in wall Z-Wave Series 800 actuator for shutters and blinds. FIBARO ROLLER SHUTTER 4 is a device designed to control roller blinds, awnings, venetian blinds, curtains and pergolas. FIBARO ROLLER SHUTTER 4 allows precise positioning of roller blinds or venetian blind slats. The device is equipped with energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
    SKU: ZWFIB FGR-224
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Disponibilidad: En existencia

    New devices design
    FIBARO focused on easy installation and intuitive first run. There are more inputs for N and L wires, so that allows opt-out from using splicing connectors.

    Smaller device
    Device's shape and dimension enable easy and fast installation in flush-mounted boxes. Button and the diode are easily accesible.

    Equipped with plug connectors
    Enable even faster assembly - no need to use screw driver.

    3 Extra connecting cables included in the box
    Additional wires to connect the button are included.

    Inbuilt Bridge
    Easy bridging option for live and neutral. There is no need to use wago connectors for connecting wires. You save the space in the box and shorten installation time thanks to push-in wires connector.

    Features of Fibaro Roller Shutter 4

    • Compatible with any Z-Wave or Z-Wave+ Controller
    • One of the smallest shutter controller available
    • Equipped with Z-Wave 800 chip to provide better range
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
    • Can be used with roller blinds, venetian blinds, pergolas, curtains, awnings, blind motors with electronic or mechanical limit switches
    • Active power and energy metering functionality
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network
    • Works with various types of switches – momentary, toggle and dedicated roller blind switches
    • Easy and quick too install thanks to push-in wires connector and inbuilt bridge
    • To be installed in wall switch boxes

    Technical specifications of FIBARO FGR-224

    • Power supply: 100-240V~50/60Hz
    • Rated load current: 2A for motors with compensated power factor (inductive loads)
    • Supported motor type: single-phase AC motors
    • Required limit switches: electronic or mechanic
    • Operating temperature: 0°C - 35°C
    • For installation in boxes: Ø = 50mm, depth ≥ 60mm
    • Radio protocol: Z-Wave (800 series chip)
    • Radio signal power: up to 5dBm
    • Radio frequency band: 868.4 MHz
    • Range: up to 100m outdoors, up to 30m indoors (depending on the terrain and building structure)
    • Dimensions (L x W x H) 46mm x 36mm x 19,9mm
    • Compliance with EU directives: RoHS 2011/65/EU, RED 2014/53/EU
    Especificaciones de productos
    tecnologíaZ-Wave
    FuncionPersianas
    Tipo de productoMicromodulo
    Escriba su propia opinion
    • Solo los usuarios registrados pueden agregar sus comentarios
    *
    *
    • Malo
    • Excelente
    *
    *
    *
    *

    New devices design
    FIBARO focused on easy installation and intuitive first run. There are more inputs for N and L wires, so that allows opt-out from using splicing connectors.

    Smaller device
    Device's shape and dimension enable easy and fast installation in flush-mounted boxes. Button and the diode are easily accesible.

    Equipped with plug connectors
    Enable even faster assembly - no need to use screw driver.

    3 Extra connecting cables included in the box
    Additional wires to connect the button are included.

    Inbuilt Bridge
    Easy bridging option for live and neutral. There is no need to use wago connectors for connecting wires. You save the space in the box and shorten installation time thanks to push-in wires connector.

    Features of Fibaro Roller Shutter 4

    • Compatible with any Z-Wave or Z-Wave+ Controller
    • One of the smallest shutter controller available
    • Equipped with Z-Wave 800 chip to provide better range
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
    • Can be used with roller blinds, venetian blinds, pergolas, curtains, awnings, blind motors with electronic or mechanical limit switches
    • Active power and energy metering functionality
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network
    • Works with various types of switches – momentary, toggle and dedicated roller blind switches
    • Easy and quick too install thanks to push-in wires connector and inbuilt bridge
    • To be installed in wall switch boxes

    Technical specifications of FIBARO FGR-224

    • Power supply: 100-240V~50/60Hz
    • Rated load current: 2A for motors with compensated power factor (inductive loads)
    • Supported motor type: single-phase AC motors
    • Required limit switches: electronic or mechanic
    • Operating temperature: 0°C - 35°C
    • For installation in boxes: Ø = 50mm, depth ≥ 60mm
    • Radio protocol: Z-Wave (800 series chip)
    • Radio signal power: up to 5dBm
    • Radio frequency band: 868.4 MHz
    • Range: up to 100m outdoors, up to 30m indoors (depending on the terrain and building structure)
    • Dimensions (L x W x H) 46mm x 36mm x 19,9mm
    • Compliance with EU directives: RoHS 2011/65/EU, RED 2014/53/EU
    Especificaciones de productos
    tecnologíaZ-Wave
    FuncionPersianas
    Tipo de productoMicromodulo
    Etiquetas de productos
    Los clientes que compraron este producto tambien han comprado

    Double Switch 2 - Micromódulo actuador de 2 salidas Z-Wave Plus

    ZWFIB FGS-223
    €77,49 IVA incluido
    El micromódulo Double Switch 2 de Fibaro ha sido desarrollado para ser instalado en cajas de interruptor estándar o en cualquier otro lugar donde éste encaje. El Switch 2 permite el control de los dispositivos conectados a través de la red Z-Wave oa través de un interruptor conectado a sus entradas de control. También tiene la capacidad de medir la potencia activa y el consumo de la carga a él ligada.
    Disponibilidad: El pedido se enviará tan pronto como el artículo esté disponible

    MH7H-EH Termostato para sistemas de calefacción eléctrico

    ZWMCO MH7H-EH
    €149,99 IVA incluido
    El termostato ZWMCO MH7H-EH es un dispositivo para control de temperatura ambiente, equipado con tecnología inalámbrica Z-Wave. Se aplica para controlar sistemas de calefacción eléctrica tales como cable calefactor, película electrotérmica, actuador de calefacción, válvula de globo eléctrica, etc.
    El termostato de pared ZWMCO MH7H-EH requiere una instalación estática con alimentación de red. Gracias a su diseño moderno con panel táctil de vidrio capacitivo, es particularmente adecuado para la instalación visible en las áreas de estar.
    Con los termostatos táctiles de vidrio de diseño moderno de MCO, puede controlar varios sistemas de calefacción y refrigeración, p. cable calefactor, película calefactora, válvula de agua, válvula eléctrica, caldera, fan coil, controlador de energía solar, bomba de calor, sistema de ventilación, etc.
    Disponibilidad: Generalmente disponible para envío dentro de 4-6 días hábiles después de realizar el pedido.

    Single Switch 2 - Micromódulo actuador de 1 canal Z-Wave Plus

    ZWFIB FGS-213
    €77,49 IVA incluido
    El micromódulo Single Switch 2 de Fibaro ha sido desarrollado para ser instalado en cajas de interruptor estándar o en cualquier otro lugar donde éste encaje. El Switch 2 permite el control de los dispositivos conectados a través de la red Z-Wave oa través de un interruptor conectado a sus entradas de control. También tiene la capacidad de medir la potencia activa y el consumo de la carga a él ligada.
    Disponibilidad: En existencia

    Detector de bus PIR para la serie 100

    JA-110P
    €39,99 IVA incluido
    Disponibilidad: Generalmente disponible para envío dentro de 1-2 días hábiles después de realizar el pedido.

    Bypass Dimmer 2

    ZWFIB FGB-002
    €15,99 IVA incluido

    Bypass Dimmer Fibaro es un dispositivo complementario al Dimmer Fibaro FGD211.

    Su instalación hace posible regular las fuentes de luz de un consumo mínimo de energía, como por ejemplo los LED de 0,5 Watios.

    Disponibilidad: En existencia