Qubino RGB/RGBW Dimmer

Aeotec's WallMote is a remote control, wall switch and Z-Wave controller, all-in-one. This device can manage its own Z-Wave network (if included as a primary controller) and can control other devices such as sockets, blinds, dimmers, lights, electronic locks and many more. Obviously, it can also be integrated into a Z-Wave network as a secondary controller. WallMote is the perfect Z-Wave controller. Wireless, battery powered, but capable of controlling hundreds of devices in more than a dozen Z-Wave scenarios.

Description Every Z-Wave Smart Home depends on data for truly intelligent automation; automation that makes a Smart Home actually smart, responsive and secure. The Aeotec TriSensor provides your Smart Home with its most essential data. 3 different sensors are crafted into Aeotec TriSensor’s impossibly small finish. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting. At only 1.77 inches in size and weighing only 50 grams, Aeotec TriSensor is really small. That means it can be placed almost anywhere in your home. TriSensor offers 4 different installation possibilities: in the corner, on a shelf, beam or in the Aeotec Recessor. Features Motion Sensor The sensor detects motion in up to 7.5 meters distance. It can also be adjusted and calibrated to it needs, e.g. to avoid an alarm by a pet. Temperature The temperature sensor is accurate and detects temperatures in the range from -10°C to 50°C (+/- 1°C). The temperature can be used in connection with heating device. Furthermore the Aeotec TriSensor can control a directly associated device, if the temperature goes above a configured level. Light Measure the light intensity from 0 - 30000 Lux and automate your ambient light in depending on the daylight.

The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°. The sensor is easily retrofittable. Furthermore, the Aeotec Door/Window Sensor 7 can include other sensors by being connected with other binary sensors like NTC contacts, micro switches or flood sensor. Thanks to its slim design the Aeotec Door/Window Sensor 7 can be installed unflashy on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.

This small device allows you to control the door of your garage or heating system, as a smart complement to your alarm system or simply to make all devices smart in your home. As an additional development of the Universal binary Sensor, the FIBARO Smart Implant controls the connected device, can be used for scene control, has a temperature sensor and is compatible with binary sensors. In addition to controlling the devices (ON / OFF), the device reads the sensor data and amplifies the existing Z-Wave network.

FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.

FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads. It can also measure active power and energy consumed by the load. Controlled devices may be powered by 12 or 24V DC.

Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.