Cookies help us deliver our services. By using our services, you agree to our use of cookies.
(0) items
You have no items in your shopping cart.
My Cart
Search
RisControl
RisControl Alarm & Smart Home Controller
RC-RCTL-A-SHC
€652.71 incl tax
The new RisControl controller is an 8-inch Touchscreen that incorporates Smart Home, Alarm, Surveillance (Cameras and NVR) and Z-Wave smart home devices in one user friendly interface, providing an exceptional user experience, ease of use, and a fully customizable interface. The RisControl user interface offers users complete control over the alarm, video, and Smart Home. Utilizing the straightforward wizard and powerful rule engine of RisControl, users can set up three types of automation: manual scenes, scheduled automation, and triggered automation, using a variety of smart home devices as well as detectors.
Smart Switch 6
ZWAEO ZW096-UK
€73.98 incl tax €64.98 incl tax
The Aeotec Smart Switch 6 is an intelligent remote controllable adapter plug which can control and monitor any electrical device. Due to its energy measurement function, you can identify all power eater in your home.
Availability: Usually available for shipment within 4-6 business days after ordering.
Aeotec TriSensor
ZWAEO ZWA005
€65.99 incl tax
Description Every Z-Wave Smart Home depends on data for truly intelligent automation; automation that makes a Smart Home actually smart, responsive and secure. The Aeotec TriSensor provides your Smart Home with its most essential data. 3 different sensors are crafted into Aeotec TriSensor’s impossibly small finish. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting. At only 1.77 inches in size and weighing only 50 grams, Aeotec TriSensor is really small. That means it can be placed almost anywhere in your home. TriSensor offers 4 different installation possibilities: in the corner, on a shelf, beam or in the Aeotec Recessor. Features Motion Sensor The sensor detects motion in up to 7.5 meters distance. It can also be adjusted and calibrated to it needs, e.g. to avoid an alarm by a pet. Temperature The temperature sensor is accurate and detects temperatures in the range from -10°C to 50°C (+/- 1°C). The temperature can be used in connection with heating device. Furthermore the Aeotec TriSensor can control a directly associated device, if the temperature goes above a configured level. Light Measure the light intensity from 0 - 30000 Lux and automate your ambient light in depending on the daylight.
Availability: Available in Usually available for shipment within 4-6 business days after ordering.
Aeotec Multisensor 7
ZWAEO ZWA024
€85.98 incl tax
Motion for security. Motion for presence. Motion for management. The Aeotec MultiSensor 7 motion sensor is perfect for more than just an intelligent security system. With a 10 metre range and a 120° field of view, MultiSensor 7 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – MultiSensor 7 makes your home automation system more powerful and more intelligent.
Availability: Usually available for shipment within 4-6 business days after ordering.
Double Switch 2 - Relay Insert 2 * 1.5 KW Z-Wave Plus
ZWFIB FGS-223
€77.49 incl tax
FIBARO Double Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
Availability: Out of Stock - on backorder and will be dispatched once in stock.
Dimmer 2 - 250W Universal Insert Module
ZWFIB FGD-212
€77.49 incl tax
Z-Wave Fibaro Universal Dimmer 2 250W
FIBEFGD-212
FGD-212
Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).
FIBEFGD-212
FGD-212
Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).
Availability: Out of Stock - on backorder and will be dispatched once in stock.
Z-Wave Wall Plug w/ metering - F plug (Shucko)
ZWFIB FGWPF-102-5
€75.03 incl tax
Fibaro Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2,500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination.
Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.
Need price for quantities? Please contact us!
Chat tool;
Contact form;
Phone: +351 223 744 938 ;
email: [email protected] ;
Skype: EuroX10.com
Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.
Need price for quantities? Please contact us!
Chat tool;
Contact form;
Phone: +351 223 744 938 ;
email: [email protected] ;
Skype: EuroX10.com
Availability: Out of Stock - on backorder and will be dispatched once in stock.
Single Switch 2 - Relay Insert 1 channel Switch2 Z-Wave Plus
ZWFIB FGS-213
€77.49 incl tax
FIBARO Single Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
Availability: In stock
Relay Insert 2 * 1.5 KW
ZWPHI PAN06
€59.99 incl tax
The Philio Insert Switch allows controlling two independent loads both wirelessly via Z-Wave and locally utilizing a traditional wall switch. Thanks to its calibration technology the PAN06 cannot only be used to switch AC devices ON and OFF, it also works perfectly with many kind of light, e.g. incandescent, fluorescent and LEDs. In addition to this, the PAN06 can be connected to 12V/DC, which makes it possible to switch 12V MR-16 light as well. The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the insert that is controlling the load. This device is designed for a 3 wire system and needs a neutral wire in the wall box.
Availability: In stock
Philio Dimmer socket
ZWPHI PAD02-1
€44.99 incl tax
Transform any home into a smart home with the Philio PAD02 Z-Wave Smart Dimmer Socket. The dimmer socket can be easily adapted to your current lighting devices, uses your existing lamp (E27 socket), and provides Z-Wave wireless and with remote control of overhead lighting. Use the dimmer feature to customize the lighting output and create the perfect ambiance for any room. Providing ultimate flexibility, the Philio Z-Wave Smart Dimmer Socket allows you to operate the lighting by itself or easily integrate the socket with two-way, three-way or four-way wiring configurations by adding the Philio Smart Switch Modules for Z-Wave. Take control of your home lighting with Philio Z-Wave Smart Lighting Controls!
Easily adapt to any standard lamp E27 socket with the Philio Z-Wave Smart Dimmer Socket to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or used to create dimmable ambient interior lighting scenes.
Easily adapt to any standard lamp E27 socket with the Philio Z-Wave Smart Dimmer Socket to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or used to create dimmable ambient interior lighting scenes.
Smart Color Button
ZWPHI PSR04
€59.99 incl tax
Philio’s „Smart Color Button“ is a real multi-talent. Use it as a remote control or switch your devices on and off. Turning right or left changes room temperature, drives shutters up and down or dims the light. The smart button gives a feedback to the last action with its colored LED ring.
Put your Philio Color Button to the refrigerator or heaters. Its backside is magnetic and sticks on metallic surfaces.
The Color Button can be connected to all relevant Z-Wave gateways (as secondary controller) and controls all devices within your intelligent Z-Wave network.
Availability: Usually available for shipment within 4-6 business days after ordering.
MH7-WH Water Heating Thermostat
ZWMCO MH7H-WH
€149.99 incl tax
The MCOEMH7H-WH thermostat is the second Generation of the MCO Home Underfloor water heating thermostat. The thermostat is designed to be used for room temperature control, equipped with Z-Wave wireless technology. It is applied to control water heating systems such as wall mounted boiler, water valve/pump, under floor pipes, radiator systems etc. and electrical systems such as heating cable, electro-thermal film, heating actuator, electrical globe valve etc. The second Generation has the functionality to be connected in its association group with binary actors like plugs and relays. That allows you full control of any On/Off heating actuator via the MCOEMH7H-WH2 without the permanent use of a static Z-Wave controller. The wall thermostat MCOEMH7H-WH2 requires an installation with permanent mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas. With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc.
Availability: Usually available for shipment within 4-6 business days after ordering.
Wall Thermostat with Integrated Relay
ZWSEC SRT323
€103.63 incl tax
SRT323 is a single-box solution with integrated relay that includes time-proportional integral (TPI) software and interoperable Z-Wave radio. TPI controllers have been shown to provide considerable energy savings, compared with traditional heating controllers. The interoperable Z-Wave radio enables you to remotely change the set point, read the temperature or receive alerts. SRT323 is an ideal partner for use with a Z-Wave home gateway for web-enabled apps, allowing remote control of heating from anywhere with an Internet connection. You no longer have to worry about returning to a cold house.
Wall Thermostat with LCD display
ZWSEC SRT321
€103.63 incl tax €127.46 incl tax
The ZWSEC_SCP318 is a battery operated wall thermostat. Using a big wheel on the device the user can preset the desired target temperature in the room. By verifying the target temperature with the measured real temperature closed to the device the unit decides how to operate a wirelessly attached power switch that is attached to the heater. In parallel a central gateway of z-Wave control software can set the target temperature using Z-Wave. This enables to realize a time scheduled zone heating. The thermostat itself does not have any internal timers but executes the wireless settings (COMMAND CLASS THERMOSTAT_SETPOINT) and the local setup.
4 in 1 Sensor (motion, illumination, temperature, door) - Z-Wave Plus
ZWPHI PST02-1A
€59.00 incl tax
The Z-Wave 4 in 1 sensor (ZWphiPST02-1A) is designed with three detection sensors:
- Door/window sensor;
- PIR/Motion;
- Temperature sensor;
- Luminosity sensor.
Availability: In stock
3 in 1 Sensor (motion, illumination, temperature) - Z-Wave Plus
ZWPHI PST02-1B
€49.00 incl tax €53.98 incl tax
The Z-Wave 3 in 1 sensor (ZWphiPST02-1B) is designed with three detection sensors:
- PIR/Motion;
- Temperature sensor;
- Luminosity sensor.
Availability: In stock
Outdoor Motionsensor with magnetic holder and lens cover
ZWPHI PSP05-D
€59.00 incl tax
The new Philio Motion Detector in small ball design detects movements at a distance of up to 12 meters. The sensor can be easily installed on the ceiling or a wall thanks to a supplied magnetic holder. Thanks to the unique and descretely design, you can place the sensor anywhere to automate your light. Then your light switches on only when the movement is detected, and if there is no person in the room, the lamps are not switched on.
The sensor also includes a lens cover. With the cover, you can hide an area which is not to be detected by the motion detector.
In addition, the sensor is suitable for outdoor use. This allows you to extend your automation and alarm system to the outside. The sensor is battery operated and can be easily added to your Z-Wave Smart Home System.
The sensor also includes a lens cover. With the cover, you can hide an area which is not to be detected by the motion detector.
In addition, the sensor is suitable for outdoor use. This allows you to extend your automation and alarm system to the outside. The sensor is battery operated and can be easily added to your Z-Wave Smart Home System.
Availability: In stock
Fibaro Motion Sensor Z-Wave Plus
ZWFIB FGMS-001 ZW5
€75.03 incl tax
The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.
Need price for quantities? Please contact us!
Chat tool;
Contact form;
Phone: +351 223 744 938 ;
email: [email protected] ;
Skype: EuroX10.com
Need price for quantities? Please contact us!
Chat tool;
Contact form;
Phone: +351 223 744 938 ;
email: [email protected] ;
Skype: EuroX10.com
Availability: Out of Stock - on backorder and will be dispatched once in stock.
Z-Wave Plus Smoke sensor 2
ZWFIB FGSD-002
€84.87 incl tax
The Fibaro Smoke Sensor is a universal, optical Z-Wave Plus smoke sensor. The device is battery operated (battery life of up to 3 years).
Smoke detection is signaled through siren and LED diode blinking.
The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperature threshold is exceeded.
The Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).
Availability: Out of stock
Roller Shutter 4
ZWFIB FGR-224
€81.18 incl tax
FIBARO Roller Shutter 4 - in wall Z-Wave Series 800 actuator for shutters and blinds. FIBARO ROLLER SHUTTER 4 is a device designed to control roller blinds, awnings, venetian blinds, curtains and pergolas. FIBARO ROLLER SHUTTER 4 allows precise positioning of roller blinds or venetian blind slats. The device is equipped with energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
Availability: In stock
Z-Wave Plus Relay Insert Blind
ZWPHI PAN08
€59.99 incl tax
The Philio Roller Shutter Controller insert allows controlling motors for jalousies and blinds both via Z-Wave wirelessly and locally utilizing a traditional wall switch.
The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the Philio insert that is controlling the load.
This relay is able to detect the position of the shutter by using the patterned power measuring method. So it can be remote controlled not only fully up or down, but also can be adjusted to e.g. 30% or 50%. And when manual controlled by using the push button, the controller also can memorize the position and send the new shutter position to its controller (ex. IP-Gateway).
The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of roller shutter.
The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the Philio insert that is controlling the load.
This relay is able to detect the position of the shutter by using the patterned power measuring method. So it can be remote controlled not only fully up or down, but also can be adjusted to e.g. 30% or 50%. And when manual controlled by using the push button, the controller also can memorize the position and send the new shutter position to its controller (ex. IP-Gateway).
The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of roller shutter.
Availability: In stock
Smart Meter
ZWGOA ZMNHTD1
€119.90 incl tax
This Z-Wave module is used for energy measurements in single-phase electrical power network till 65A. Meters measure energy directly in 2-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals.
The module can be controlled through Z-wave network and it acts as repeater in order to improve range and stability of Z-wave network.
It is designed to be mounted on DIN rail.
item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies
Availability: Usually available for shipment within 4-6 business days after ordering.
Extensor Z-Wave-IR
RM-ZXT600.EU
€82.00 incl tax
Z-Wave to IR extender for air-conditioning (AC) devices. It works with any Z-Wave compliant gateway or controller by translating Z-Wave thermostat Commands to AC IR control code. IR Extender also comes with built-in temperature sensor which allows gateway or controller to get the current room temperature.
Recessor for Multi Sensor 6
ZWAEO DSE010
€19.99 incl tax
With the ceiling mount called "Recessor" you can integrate the Aeotec multi sensor into the ceiling - almost invisible and effective. Analogous to integrated ceiling lamps the sensor disappears almost complete in the ceiling. Simultaneously the detection area for the multi sensor (i.a. motion and light intensity) is enlarged.
Danalock V3 (silver), Bluetooth & Z-Wave
DNLOCK V3 BTZW
€270.60 incl tax
The danalock V3 evolution is based on the feedback from devoted customers and the latest development in data security and smart home technology.
Smaller, stronger and easier to install the V3 takes the lead on the smartlock market and is setting new standards for years to come.
Setting New Standards:
Twice the power;
Four times faster;
Smarter, smaller and safer;
Auto calibration procedure;
Lock Status;
Smaller, stronger and easier to install the V3 takes the lead on the smartlock market and is setting new standards for years to come.
Twice the power;
Four times faster;
Smarter, smaller and safer;
Auto calibration procedure;
Lock Status;
Availability: In stock