With the AEOTEC Dual Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Additionally, the ZW132 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

The AEOTEC Nano Dimmer is a flush-mounted radio module which turns a standard light installation into an intelligent smart home component with Z-Wave wireless technology.

The compact radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls (switch/dim) the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Close your motorized windows automatically if it starts raining or shut down your shades if it is to warm outside. The Aeotec Nano Shutter enables you to control a broad selection of devices wirelessly and intelligently. The module equips motors for shutters, shades, garage doors, venetian blinds, etc. with Z-Wave technology. Thus, shutters and venetian blinds can be controlled both wirelessly via Z-Wave commands and locally via the connected conventional wall switch. The Aeotec Nano Shutter is designed to be mounted inside a flush mounting box, hidden behind a conventional wall switch.

The Aeon Labs Micro Energy Illuminator Micro is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Micro Smart Energy Illuminator is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Heavy Duty Switch is used for wireless control, automate and record the power consumption of heavy loads up to 40 amps. The Device can be controlled by other Z-Wave devices and can switch his heavy loads. He also works as a repeater and can forward, if the respective device are in range, signals to other Devices.

With AEOTEC’s new and smart RGB bulb color comes into play. The Aeotec bulb fits into every E27 bulb holder and connects to a smart home center through Z-Wave wireless technology. It is able to vary brightness and light color as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes.
The bulb uses 15 different LED diodes to shine in perfect shading of natural white light. These 15 diodes confer light temperature of 2580-7050K on the LED bulb.

• Cold white: 4745K to 7050K;
• Natural white: 3710K to 4745 K;
• Warm white: 2580K to 3710K ;

Well-known manufacturers such as Samsung and Philips also use the same LED technology.
An additional row with diodes gives Aeotec’s bulb the opportunity to vary between 16 million colors.
Furthermore the bulb can be switched on and off time-controlled via defined scenes or by a motion sensor. Use your Aeotec bulb as notification or status LED. Installed in the corridor it could flash in red color if you want to leave your home and windows or terrace door are still open. Due to LED technology power consumption is very low compared to conventional bulbs. The Aeotec bulb is as bright as a conventional 70W bulb, but needs only 9W.

Smarter. Safest. Smaller still. Plug it. Automate it. Control it. Understand how much electricity you are spending. Smart Switch 7 is Aeotec's smallest smart plug and is also everyone's safest.

Intelligence is in control. Appliances turn on when needed and off when not. On a schedule. Or intelligently automated and triggered when needed. You are completely in control. It is smart because it can be automated. But it's also a smart plug because the power to turn it on or off manually is always yours.

In real time and with 99% accuracy, Smart Switch 7 will analyse appliances electricity consumption helping you save what you spend. Furthermore the Smart Switch 7 is one of the best in design and quality. European design, German engineering and SGS certfication make Smart Switch 7 the smallest and safest smart plug.

Recessed Door Sensor is a new small and compact Z-Wave sensor with the size of 2.5*7 cm (main body), that tells you and your Z-Wave network if a door is open or closed. It is nearly invisible, as the sensor is installed with the help of a slight drill hole hidden away on the top of your door. Installing Recessed Door Sensor is easy, as you only have to add it to your home’s network activating its battery and associating it with your Z-Wave system.

Motion for security. Motion for presence. Motion for management. The Aeotec MultiSensor 7 motion sensor is perfect for more than just an intelligent security system. With a 10 metre range and a 120° field of view, MultiSensor 7 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – MultiSensor 7 makes your home automation system more powerful and more intelligent.

Description Every Z-Wave Smart Home depends on data for truly intelligent automation; automation that makes a Smart Home actually smart, responsive and secure. The Aeotec TriSensor provides your Smart Home with its most essential data. 3 different sensors are crafted into Aeotec TriSensor’s impossibly small finish. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting. At only 1.77 inches in size and weighing only 50 grams, Aeotec TriSensor is really small. That means it can be placed almost anywhere in your home. TriSensor offers 4 different installation possibilities: in the corner, on a shelf, beam or in the Aeotec Recessor. Features Motion Sensor The sensor detects motion in up to 7.5 meters distance. It can also be adjusted and calibrated to it needs, e.g. to avoid an alarm by a pet. Temperature The temperature sensor is accurate and detects temperatures in the range from -10°C to 50°C (+/- 1°C). The temperature can be used in connection with heating device. Furthermore the Aeotec TriSensor can control a directly associated device, if the temperature goes above a configured level. Light Measure the light intensity from 0 - 30000 Lux and automate your ambient light in depending on the daylight.

The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°. The sensor is easily retrofittable. Furthermore, the Aeotec Door/Window Sensor 7 can include other sensors by being connected with other binary sensors like NTC contacts, micro switches or flood sensor. Thanks to its slim design the Aeotec Door/Window Sensor 7 can be installed unflashy on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.

The Aeotec Water Sensor 7 Pro is a flood sensor, a leak sensor and a safety sensor in one device.

The Aeotec Water Sensor 7 is a flood sensor, a leak sensor and a safety sensor in one device.

The Aeotec Door Window Sensor 7 Pro is a sensor which detects if your window is opened, closed, or tilted which requires a tilt angle of at least 5°.

Run your smart home locally, privately, and cloud-free. Aeotec Z-Stick 7 lets you build your own automation gateway using Gen7 and 700 series Z-Wave technologies.
Brimming with new features and technology, yet wholly more compact. Z-Stick 7 is 79% smaller than Z-Stick Gen5+ and yet it is still just as easy to setup.

Aeotec's WallMote is a remote control, wall switch and Z-Wave controller, all-in-one. This device can manage its own Z-Wave network (if included as a primary controller) and can control other devices such as sockets, blinds, dimmers, lights, electronic locks and many more. Obviously, it can also be integrated into a Z-Wave network as a secondary controller. WallMote is the perfect Z-Wave controller. Wireless, battery powered, but capable of controlling hundreds of devices in more than a dozen Z-Wave scenarios.

Aeotec's WallMote is a remote control, wall switch and Z-Wave controller, all-in-one. This device can manage its own Z-Wave network (if included as a primary controller) and can control other devices such as sockets, blinds, dimmers, lights, electronic locks and many more. Obviously, it can also be integrated into a Z-Wave network as a secondary controller. WallMote is the perfect Z-Wave controller. Wireless, battery powered, but capable of controlling hundreds of devices in more than a dozen Z-Wave scenarios.

Aeotec’s Z-Wave Plus repeater and range extender.

The Aeotec Siren 6 makes your home smarter and safer. The Aeotec Siren 6 enriches your Smart Home with a further safety factor. In combination with other Z-Wave devices, the visually appealing alarm siren warns of various situations with acoustic (110db) and visual signals. Whether water escapes in the cellar, smoke develops in the kitchen or an open door at night, the siren draws your attention to all these conspicuous features. You can also use the siren as a doorbell in addition to the alarm functions. The Aeotec Siren 6 plays 30 different tones, which are defined via parameters in the gateway. In summary, this device works particularly well for any type of acoustic and visual alarm in your Smart Home. The power supply of the Aeotec Siren 6 works easily via a power socket or battery operated. Due to its high-quality design, the siren fits well into your rooms and is hardly noticed.

The Smart Home Hub V3 is the central connection and acts like the intelligent brain of your modern Smart Home. It allows you to connect wirelessly to a wide range of smart devices.
The associated SmartThings App on your Smartphone becomes the basic control center. The hub connects to your router via Wi-Fi or the included LAN cable and is ready to go in no time.

Note from Smarthings and Aeotec/Z-Wave Europe:
"The former Samsung SmartThings Hub has only changed its name. Technically it is the same product.
There is just a change in branding of this product. Now it is called “Aeotec Smart Home Hub - Works as a SmartThings Hub”.

Based on a worldwide agreement between Samsung and Z-Wave Europe, Z-Wave Europe GmbH is the SmartThings sales channel for the “Works with SmartThings Hub” and other SmartThings components.
Therefore, Samsung points customers and prospects to Z-Wave Europe, when they ask for the SmartThings Hub. Of course the user has access to the very large Smart Home Ecosystem, which is based on the SmartThings App."

The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly report immediate wattage and kWh usage to central control point gateways and can be easily and safely installed by anyone. Ease and safety are paramount: Electricians are not required to install the Aeon Labs Smart Energy Monitor; the customer never needs to handle hot exposed wiring. Current transformer clamps clamp around the AC Mains to detect energy usage for the entire house.
The main body is anchored using a back mount. The device has three clamps and reports W, kWH, V and A (up to 60 Ampere).

You want to design your home smart and are looking for a suitable starter package? Smart Home is a term to you, but you have questions about the selection of products? Then we have the solution for you here. With the Aeotec SmartThings Starter Kit you get an perfect all-round package for getting started in the smart home world.

The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly report immediate wattage and kWh usage to central control point gateways and can be easily and safely installed by anyone.
Ease and safety are paramount: Electricians are not required to install the Aeon Labs Smart Energy Monitor; the customer never needs to handle hot exposed wiring. Current transformer clamps clamp around the AC Mains to detect energy usage for the entire house. The main body is anchored using a back mount which opens to easily. The device reports W and kWH.

Din rail enclosure that can be used to mount Fibaro modules on DIN rails.

Expander for CMEB box.
It fits on the side of the CMEB and it makes it 17,5mm wider and adds 8 terminals.

Harmony companion, IR Hub to control all your media devices.

Integration with Z-Wave hubs: Home Center 3
Home Center 3 Lite
VERA edge
Vera Plus
Vera Secure
Smartthings

Compatilbe with Alexa, Google Home, Philips HUE Hub, and any IR (infra-red) controllable device.

One look and you are home. With the Aeotec Cam 360, you get a 360 degree view of your room at a glance. Display a detailed view of what's going on at home at day or night. Communicate through 2-way audio and a built-in microphone via the SmartThings App. Receive alerts when motion or sound is detected. Customize detection zone to pay closer attention to specific areas for unexpected activity. Use SmartThings App to automate scenes and routines with compatible smart devices.

Aeotec Nano Dimmer Bypass for use with Aeotec Nano Dimmer has been designed to stop most bulbs from flickering including static and dimmable LEDs and CFLs.

The Aeotec Smart Switch 6 is an intelligent remote controllable adapter plug which can control and monitor any electrical device. Due to its energy measurement function, you can identify all power eater in your home.

With the Water Sensor 6 of Aeotec you are protected against water damages. This device is already greatful but with the Water Sensor Dock it becomes more greatful.The installation of the dock offers several advantages to you.

The product is connected to the Aeotec Water Sensor Dock (AEOEZW160) and detects even the smallest amounts of water over its entire length.

German engineered to help you get to market quickly and with quality, the Aeotec Z-Pi 7 development kit lets you adapt existing hardware to work with Z-Wave.

Invisible installation. Installing Aeotec Recessed Door Sensor 7 is easy. Pairing it with an automation system takes no more than activating the battery and scanning the QR code. Making the door sensor invisible means little more than a drill hole hidden away on the door frame.

The Aeotec aërQ is a tiny sensor that offers monitoring of crucial indoor environment measurements.