My Cart

Filters

Personal menu

Preferences

Manufacturer: Fibaro

Double Switch 2 - Relay Insert 2 * 1.5 KW Z-Wave Plus

€77.49 incl tax

FIBARO Double Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

SKU: ZWFIB FGS-223

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Availability: Out of Stock - on backorder and will be dispatched once in stock.

Qty:

Overview
Specifications
Reviews
Contact Us

Features:

Compatible with any Z-Wave or Z-Wave+ Controller;
Supports protected mode (Z-Wave network security mode) with AES-128 encryption;
Advanced microprocessor control;
Active power and energy metering functionality;
Works with various types of switches – momentary, toggle, three-way, etc;
To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations;
Built-in scene activation mechanism;
Configuration menu with a diode;
1 to 3 presses and holding the key pressed down can be mapped to four different actions;
Very accurate energy measurement +/- 1 % for power above 5W;
Z-Wave network coverage tester;
Allows software updates;
Recommended to control resistive and incandescent loads;

TechInfo:

Power supply: 100-240V~ 50/60 Hz;
Rated Current (IEC standards): 6.5A per channel, 10A overall (resistive loads);
Operating temperature: 0-35°C;
Overcurrent protection: required external 10A circuit breaker;
Radio protocol: Z-Wave (500 series chip);
Radio signal power: up to 1mW;
Radio frequency: 868.4 or 869.8 MHz EU;
Range: up to 50m outdoors, up to 40m indoors;
Comply with EU directives: EMC 2014/30/EU, R&TTE 1999/5/EC, RoHS 2011/65/EU, LVD 2014/35/EU;
Dimensions (L x W x H): 2.5 x 38.25 x 20.3 mm;

Products specifications

Technology	Z-Wave
Function	Relay / on-off
Product type	In wall

Your name *

Your email *

Subject: *

Enquiry *

Features:

Compatible with any Z-Wave or Z-Wave+ Controller;
Supports protected mode (Z-Wave network security mode) with AES-128 encryption;
Advanced microprocessor control;
Active power and energy metering functionality;
Works with various types of switches – momentary, toggle, three-way, etc;
To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations;
Built-in scene activation mechanism;
Configuration menu with a diode;
1 to 3 presses and holding the key pressed down can be mapped to four different actions;
Very accurate energy measurement +/- 1 % for power above 5W;
Z-Wave network coverage tester;
Allows software updates;
Recommended to control resistive and incandescent loads;

TechInfo:

Power supply: 100-240V~ 50/60 Hz;
Rated Current (IEC standards): 6.5A per channel, 10A overall (resistive loads);
Operating temperature: 0-35°C;
Overcurrent protection: required external 10A circuit breaker;
Radio protocol: Z-Wave (500 series chip);
Radio signal power: up to 1mW;
Radio frequency: 868.4 or 869.8 MHz EU;
Range: up to 50m outdoors, up to 40m indoors;
Comply with EU directives: EMC 2014/30/EU, R&TTE 1999/5/EC, RoHS 2011/65/EU, LVD 2014/35/EU;
Dimensions (L x W x H): 2.5 x 38.25 x 20.3 mm;

Products specifications

Technology	Z-Wave
Function	Relay / on-off
Product type	In wall

Customers who bought this item also bought

Dimmer 2 - 250W Universal Insert Module

ZWFIB FGD-212

€77.49 incl tax

Z-Wave Fibaro Universal Dimmer 2 250W
FIBEFGD-212
FGD-212

Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).

Availability: In stock

Single Switch 2 - Relay Insert 1 channel Switch2 Z-Wave Plus

ZWFIB FGS-213

€77.49 incl tax

FIBARO Single Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

Availability: In stock

FIBARO Smart Implant

ZWFIB FGBS-222

€57.81 incl tax

This small device allows you to control the door of your garage or heating system, as a smart complement to your alarm system or simply to make all devices smart in your home. As an additional development of the Universal binary Sensor, the FIBARO Smart Implant controls the connected device, can be used for scene control, has a temperature sensor and is compatible with binary sensors. In addition to controlling the devices (ON / OFF), the device reads the sensor data and amplifies the existing Z-Wave network.

Availability: In stock

Fibaro Motion Sensor Z-Wave Plus

ZWFIB FGMS-001 ZW5

€75.03 incl tax

The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.

Need price for quantities? Please contact us!
Chat tool;
Contact form;
Phone: +351 223 744 938 ;
email: [email protected] ;
Skype: EuroX10.com

Availability: In stock

Flood Sensor Z-Wave Plus

ZWFIB FGFS-101 ZW5

€79.95 incl tax

The Fibaro Flood Sensor will alert you of a threatening flood or a rapid temperature rise or drop and has a wide variety of additional functions. Thanks to its flexible gold telescopic probes the device can even work on uneven surfaces. The Flood Sensor has a built in alarm siren which will help you to react quickly in case of a flood, rapid temperature change or the attempt to tamper with it. Aside from the alarm siren, the device can alert you of a threat using colour displays from the built in RGB diode. In addition to this a tilt sensor will detect tilt and movement over 15 degrees and send out a report to the main controller. The built in temperature sensor can not only be used to serve as a fire alarm sensor, it may also be used to manage an in-floor heating system.

The Input terminal allows you to connect an external probe and install the sensor in any location. The Output terminal allows for a connection to an alarm system.

The Sensor will work on 12 or 24 VDC or battery.

Availability: In stock