Manufacturer: Philio

3 in 1 Sensor (motion, illumination, temperature) - Z-Wave Plus

€49.00 incl tax

Old price: €53.98 incl tax

The Z-Wave 3 in 1 sensor (ZWphiPST02-1B) is designed with three detection sensors:

PIR/Motion;
Temperature sensor;
Luminosity sensor.

The detector can be used as a security device or home automation device. When the detector is cooperated with security appliances, the detector is acting as a security device by detecting changes in infra-red radiation levels. If a person moves within or across the devices field of vision, a trigger radio signal will be transmitted to cause full alarm condition in order to frighten intruders away. Alternatively, when the detector is worked with Z-Wave Controller, the detector can be set to perform the role of home automation device by detecting both changes in infra-red radiation levels and percentage of lux levels. Every time when PIR trig, the sensor will also send temperature and illumination value as well. Also the temperature will send out the value when temperature changes. Note: The illumination sensor does not work with Fibaro Homecenter 2 and Zipabox yet.

SKU: ZWPHI PST02-1B

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Availability: In stock

Qty:

Overview
Reviews
Contact Us

Features:

Adopt newest Z-wave 400series chip, support multichannel operation and higher data rate (9.6/40/100kbps);
Super mini design and good PIR detect range;
Higher output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range;
Built in illumination sensor while applied to light control;
Adopt Z-Wave protocol to secure the success of wireless two way communication;
Tamper proof protection;
Low battery indication.

TechInfo:

Input voltage: 3V CR123A 1500mAh;
Battery life: >2 years;
Standby current: 48?A;
Operating current: 37mA;
Low battery voltage: 2.6V;
Frequency: 868.42 MHZ (EU);
Range: 40m indoor, 100m outdoor;
Operation Temperature: 10~40°C;
Humidity: 85%RH max;
Weight 52g;
Illumination range: 0 ~ 500 lx;
Dimension (WxHxD): 28x96x23mm.

Your name *

Your email *

Subject: *

Enquiry *

Features:

Adopt newest Z-wave 400series chip, support multichannel operation and higher data rate (9.6/40/100kbps);
Super mini design and good PIR detect range;
Higher output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range;
Built in illumination sensor while applied to light control;
Adopt Z-Wave protocol to secure the success of wireless two way communication;
Tamper proof protection;
Low battery indication.

TechInfo:

Input voltage: 3V CR123A 1500mAh;
Battery life: >2 years;
Standby current: 48?A;
Operating current: 37mA;
Low battery voltage: 2.6V;
Frequency: 868.42 MHZ (EU);
Range: 40m indoor, 100m outdoor;
Operation Temperature: 10~40°C;
Humidity: 85%RH max;
Weight 52g;
Illumination range: 0 ~ 500 lx;
Dimension (WxHxD): 28x96x23mm.

Customers who bought this item also bought

Z-Wave Wall Plug w/ metering - F plug (Shucko)

ZWFIB FGWPF-102-5

€75.03 incl tax

Fibaro Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2,500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination.
Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.

Need price for quantities? Please contact us!
Chat tool;
Contact form;
Phone: +351 223 744 938 ;
email: [email protected] ;
Skype: EuroX10.com

Availability: Out of Stock - on backorder and will be dispatched once in stock.