Shelly Qubino Wave 2PM

This module lets you transform a wired switch, into a wireless one. Use the old connections of the switch and connect it to the micromodule, it will send the information to any DI-O wireless receiver. It is even possible to change the location of the switch.

The DiO blind module allows you to control the electric blinds wirelessly and easily centralize the opening and closing of the blind set on one remote control, without having to modify the electrical installation in your home. In short: - Remote control from your bed, sofa or wireless wall control or via your smartphone thanks to the free application. - Centralized control of some or all blinds - Voice control via Amazon Alexa or Google Home smart speaker (requires home automation system DiO Home +) - Open, close and stop function at the desired opening / closing level - Transmission distance: 50 m - Can be connected to a maximum of 32 transmitters - Content: 1 module for blinds

The remotely operated FIBARO Double Smart Module is designed to turn electrical devices or circuits on and off.
The Double Smart Module (FGS-224) allows to control two devices or circuits.
The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them.

The Philio Roller Shutter Controller insert allows controlling motors for jalousies and blinds both via Z-Wave wirelessly and locally utilizing a traditional wall switch.
The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the Philio insert that is controlling the load.
This relay is able to detect the position of the shutter by using the patterned power measuring method. So it can be remote controlled not only fully up or down, but also can be adjusted to e.g. 30% or 50%. And when manual controlled by using the push button, the controller also can memorize the position and send the new shutter position to its controller (ex. IP-Gateway).
The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of roller shutter.