Flush Shutter Z-Wave Plus

The Fibaro Flood Sensor will alert you of a threatening flood or a rapid temperature rise or drop and has a wide variety of additional functions. Thanks to its flexible gold telescopic probes the device can even work on uneven surfaces. The Flood Sensor has a built in alarm siren which will help you to react quickly in case of a flood, rapid temperature change or the attempt to tamper with it. Aside from the alarm siren, the device can alert you of a threat using colour displays from the built in RGB diode. In addition to this a tilt sensor will detect tilt and movement over 15 degrees and send out a report to the main controller. The built in temperature sensor can not only be used to serve as a fire alarm sensor, it may also be used to manage an in-floor heating system.

The Input terminal allows you to connect an external probe and install the sensor in any location. The Output terminal allows for a connection to an alarm system.

The Sensor will work on 12 or 24 VDC or battery.

The Qubino RGBW Dimmer module controls RGB/RGBW LED stripes and bulbs and lets them shine in various colors. Therewith, you present your home in the right light. Beside 16 million selectable colors, you can use 5 already pre-defined scene effects (Ocean, Lightning, Rainbow, Snow and Sun).

The device is placed in a wall box right behind a RGB/GRBW switch. The switch is no longer directly connected to the light but acts as an input device for the Qubino module that is controlling the light. The Qubino RGBW Dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Thanks to Z-Wave, you can control your light conveniently via smartphone and tablet-pc as well as automatically through intelligent sensors and time schedules. Therewith, you create not only good mood atmosphere, but also use colored light within safety scenes for optical alarms or presence simulation.

Smart wallplug with consumption measurement. The smallest 16A Z-Wave plug on the market. With Z-Wave Plus technology and consumption measurement. It does not limit the power of the plug to which we connect the smart plug since these are usually 16 amps, like this SmartPlug 16A of Qubino.

Aeotec's WallMote is a remote control, wall switch and Z-Wave controller, all-in-one. This device can manage its own Z-Wave network (if included as a primary controller) and can control other devices such as sockets, blinds, dimmers, lights, electronic locks and many more. Obviously, it can also be integrated into a Z-Wave network as a secondary controller. WallMote is the perfect Z-Wave controller. Wireless, battery powered, but capable of controlling hundreds of devices in more than a dozen Z-Wave scenarios.

Description Every Z-Wave Smart Home depends on data for truly intelligent automation; automation that makes a Smart Home actually smart, responsive and secure. The Aeotec TriSensor provides your Smart Home with its most essential data. 3 different sensors are crafted into Aeotec TriSensor’s impossibly small finish. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting. At only 1.77 inches in size and weighing only 50 grams, Aeotec TriSensor is really small. That means it can be placed almost anywhere in your home. TriSensor offers 4 different installation possibilities: in the corner, on a shelf, beam or in the Aeotec Recessor. Features Motion Sensor The sensor detects motion in up to 7.5 meters distance. It can also be adjusted and calibrated to it needs, e.g. to avoid an alarm by a pet. Temperature The temperature sensor is accurate and detects temperatures in the range from -10°C to 50°C (+/- 1°C). The temperature can be used in connection with heating device. Furthermore the Aeotec TriSensor can control a directly associated device, if the temperature goes above a configured level. Light Measure the light intensity from 0 - 30000 Lux and automate your ambient light in depending on the daylight.