This kit is useful for applications in front doors, cabinets, etc. Its operation is simple, when the magnetic contact is broken, a command is sent to the LED lamp that will be actuated. The lamp has a built in switch and may act as bedside lamp. It is possible to control the light through any DI-O controller.

This pack lets you turn a wired switch into a wireless controller, to control a lighting circuit. The transmitter module connected to the wired switch will send the orders to the module. There is the possibility to add up to six DI-O wireless controllers, which will control the module.

This pack is very functional, through the mini command, it is possible to remotely control the LED lamp. The lamp has a built in switch and may act as bedside lamp. It is possible to control the light through any DI-O controller.

This module allows the shutter control to 500W. You can control locally through the switch, or wireless via a command or wireless switch. The module can be used for the control of blinds or even lighting.

This pack allows the On/Off of the illumination that is being controlled by the micromodule. The switching can be performed locally by the switch or remotely with the Remote Control provided in the pack. The Remote also allows controlling over two receivers present in housing.

This kit allows the control of loads up to 1000W, for example lamps and electric appliances. The control is done via the simple wall switch. This set is wireless, and is easy to install and configure.

This kit allows remote control of three outlet modules with capacity to 1000W, via the wireless controller. You can control three modules, the control can be made by the remote control present in this kit, or using any wireless controller from DI-O.

The actuator module with 3 channels can be actuated by any wireless controller DI-O. With its three channels, can control up to three outputs and has capacity for 3500W. It has a technical box which allows the outdoor usage.

Frequency :  433,92 MHz

This kit allows wireless control of the shutter/blinds with power up to 500W. Installing the micromodule to control the engine and connected to a switch, the shutter/blinds can be controlled locally by the switch, or wirelessly through a mini remote with 1 channel. In addition to controlling the shutter, the micromodule can also be used to control an illumination circuit. The receiver is compatible with the DI-O transmitters such as remotes or switches.

Motorize and automate your shutters in a heartbeat!

Motorize and automate your shutters in a heartbeat!

Motorize and automate your shutters in a heartbeat!

Motorize and automate your shutters in a heartbeat!

Motorize and automate your shutters in a heartbeat!

Wireless control your light and create easy light ambience in your living room... With this module, you can easily control your smart light system with a wireless wall switch or remote control. Add the DiO HomeBox and you will also be able to control it with your smartphone, create life scenarios and enjoy an easy smart light control. CONTENT 1 remote control + 2 on/off built-in module for lighting (1000W). INSTALLATION The module can easily be installed behind your lamp to control it remotely with wireless wall switch or remote control. I can also pair it with my DiO HomeBox to control my smart lights from my smartphone, anywhere, anytime.

Discreet, the nano DiO 1.0 socket allows you to control your lamps and electrical devices from your sofa.

WiFi + 433Mhz (DiO range) and voice control with Alexa and Google Home

WiFi On / Off 3000w sockets with DiO remote control WiFi + 433Mhz (DiO range) Voice control with Alexa and Google Home