Recessed Door Sensor is a new small and compact Z-Wave sensor with the size of 2.5*7 cm (main body), that tells you and your Z-Wave network if a door is open or closed. It is nearly invisible, as the sensor is installed with the help of a slight drill hole hidden away on the top of your door. Installing Recessed Door Sensor is easy, as you only have to add it to your home’s network activating its battery and associating it with your Z-Wave system.
Make your home really intelligent. One tiny device packed full of intelligence. A smart home is only truly smart when it’s intelligent. A smart home has to offer more than a schedule; it has to react to what’s occurring in a home in real-time. MultiSensor 6 is the foundation of a modern smart home; within its perfectly small exterior lies all the technology for real-time intelligence. It can detect movement, vibration and measure the temperature, luminosity, air humidity and UV radiation.
With the ceiling mount called "Recessor" you can integrate the Aeotec multi sensor into the ceiling - almost invisible and effective. Analogous to integrated ceiling lamps the sensor disappears almost complete in the ceiling. Simultaneously the detection area for the multi sensor (i.a. motion and light intensity) is enlarged.
Description Every Z-Wave Smart Home depends on data for truly intelligent automation; automation that makes a Smart Home actually smart, responsive and secure. The Aeotec TriSensor provides your Smart Home with its most essential data. 3 different sensors are crafted into Aeotec TriSensor’s impossibly small finish. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting. At only 1.77 inches in size and weighing only 50 grams, Aeotec TriSensor is really small. That means it can be placed almost anywhere in your home. TriSensor offers 4 different installation possibilities: in the corner, on a shelf, beam or in the Aeotec Recessor. Features Motion Sensor The sensor detects motion in up to 7.5 meters distance. It can also be adjusted and calibrated to it needs, e.g. to avoid an alarm by a pet. Temperature The temperature sensor is accurate and detects temperatures in the range from -10°C to 50°C (+/- 1°C). The temperature can be used in connection with heating device. Furthermore the Aeotec TriSensor can control a directly associated device, if the temperature goes above a configured level. Light Measure the light intensity from 0 - 30000 Lux and automate your ambient light in depending on the daylight.
Many people protect their home in different ways with smoke sensors, door locks and secrurity systems. But the dangers which are coursed by water mostly the people underestimate.
With the Water Sensor 6 of Aeotec your are secured of water damages perfectly. The unvinsible sensor detects minuscule amounts of liquids which can be caused by a little leak in the water pipe. An overflooding bath tub or sink doesn't cause hugh damages because the sensor can sends an alert before it is too late.
In combination with other devices in your Z-Wave network you can turn off electrical devices, close water valves or turn on pumps.
By the compact form of the Water Sensor 6 it is possible to place it nearly everywhere you want. Furthermore it contains addionally a vibration sensor which detects tamper and emergency events as well as a temperatur sensor.
With the Water Sensor 6 of Aeotec you are protected against water damages. This device is already greatful but with the Water Sensor Dock it becomes more greatful.
The installation of the dock offers several advantages to you.
Firstly you have got the opportunity to monitor two different areas in a distance of 1m from the water sensor. Connect the two spot sensors to the dock and then you can monitor separate areas. So you enlarge also the level of secrurity.
Secondly you can use the dock as loading station of the water sensor to power it with mains electricity. Connect the provided USB cable to the dock and the Water Sensor 6 does not longer need the batteries.
The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°. The sensor is easily retrofittable. Furthermore, the Aeotec Door/Window Sensor 7 can include other sensors by being connected with other binary sensors like NTC contacts, micro switches or flood sensor. Thanks to its slim design the Aeotec Door/Window Sensor 7 can be installed unflashy on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.